Electrician Services in Road 100 / Broadmoor, Pasco, WA

Why Road 100 / Broadmoor Homeowners Call Young’s

What We Handle Near Road 100 and Broadmoor

• EV charger installation – By far the most common request out here, and the one that most often needs a load calculation first.
• Detached shop and garage subpanels – A shop usually needs its own subpanel and a proper feeder rather than a single circuit run out to it.
• Hot tub and outdoor equipment circuits – Dedicated, GFCI-protected, and coordinated with where the equipment actually ends up.
• Panel and service upgrades – Where the load calculation says the existing service genuinely won’t carry what you’re adding.
• Indoor and outdoor lighting – Landscape, security and LED work, often as the yard gets finished after handover.
• Whole-house surge protection – Worth real consideration in a house full of variable-speed HVAC equipment and electronics.
• Circuits for home offices, casitas and additions – The things the builder didn’t anticipate.
• Solar panel installation and energy audits – And the electrical work that goes with them.

Why a New 200-Amp Panel Still Needs a Load Calculation

Nearly every home out here was built with a 200-amp service, and most homeowners reasonably assume that settles the question. It usually does — but not always, and the exception catches people out at exactly the wrong moment.

The complication is that a modern Pasco house is far more electric than an older one. A heat pump with electric auxiliary heat strips, an electric water heater, a range, a dryer — and then a Level 2 EV charger wanting a dedicated 40- or 50-amp circuit on top. Any of those alone is comfortable. The load calculation is about what happens when several coincide: 5pm on a January evening, aux heat engaged, dinner cooking, car plugged in.

So we run the numbers before quoting the install rather than after. Most of the time the answer is straightforward and the circuit goes in without drama. When it isn’t, you have real options — a service upgrade, or a load-management device that lets the charger back off automatically when the rest of the house is drawing hard. The second is often several times cheaper, and plenty of homeowners are never told it exists.

What Happens When We Come Out

1. You call or book onlineTell us what you’re trying to add.
2. Load calculation and panel assessmentBefore anything is quoted, so the recommendation is based on your actual house.
3. Upfront quote before any workAn exact price and your options in plain language, including permit and Franklin PUD coordination where it applies.
4. The workDone to current code, by licensed electricians, with the inspection handled.
5. Test and verifyWe confirm everything is working and safe before we leave.

Planning an Addition? Start Here

What you’re adding	What it usually needs
Level 2 EV charger	Dedicated 240V circuit, 40–50A, after a load calculation.
Detached shop	Subpanel and feeder, sized to what you’ll actually run out there.
Hot tub	Dedicated GFCI-protected circuit, sited with the equipment location.
Casita or ADU	Subpanel, and a service review — this is the one most likely to need an upgrade.
Second EV charger	Load management is usually cheaper than a service upgrade.

Keeping It Running

• Test GFCI outlets monthly — press the test button and confirm it trips and resets.
• Label your panel as you add circuits, rather than trying to reconstruct it later.
• Consider whole-house surge protection — a modern house has a lot of expensive electronics and variable-speed equipment to lose.
• If you’re planning a shop, casita or second charger, get the load calculation done early. It changes what the rest of the project costs.

Frequently Asked Questions

Who is my electric utility near Road 100?

Franklin PUD. That’s different from Kennewick, which is served by Benton PUD, and different again from Richland, which runs its own city-owned utility. It matters for meter work, service upgrades and new connections. We coordinate with Franklin PUD regularly.

My panel is brand new and 200 amps. Do I really need a load calculation for an EV charger?

Yes, and it’s quick. A modern Pasco home with a heat pump, electric auxiliary heat and an electric water heater draws considerably more on a January evening than the same house does in April. The calculation is about coincident load, not nameplate capacity. Most of the time it confirms you’re fine.

The load calculation says I’m short. Do I have to upgrade the service?

Not necessarily. A load-management device lets the charger back off automatically when the rest of the house is drawing hard, and it’s often several times cheaper than a service upgrade. It’s worth pricing both before committing.

Can you wire a detached shop?

Yes. A shop generally wants its own subpanel and a properly sized feeder rather than a single circuit run out to it — particularly if you’re running welding equipment, a compressor or a dust collector.

Do you pull permits?

Yes, where the work requires them, and we handle the inspection. Unpermitted electrical work causes problems at resale and is not worth the shortcut.

Do you do electrical and HVAC on the same visit?

Yes. We’re licensed for HVAC, electrical and plumbing in-house — one contractor who already knows the house, instead of three scheduled on three different days.

Schedule an Electrician Near Road 100

Whether it’s a charger, a shop, a hot tub or a casita, Young’s Heating and Cooling has licensed electricians serving Pasco since 2004. Call (509) 525-4328 or book online, and see our full electrical service page.

More Road 100 / Broadmoor Services